How To Reset Blink Camera?

If you own Blink cameras, you must be wondering how to reset Blink camera in general. These cameras are great mid-range smart cameras for your home to increase security. Blink cameras are simple to use and set up. In my today’s post, we will discuss how to reset a Blink camera in detail. Blink has always amazed its customers with its high-quality cameras. When you notice that your camera is not working, it’s better to reset them. It is very important to know when we actually need to reset the camera. You can continue reading to find out how to reset Blink camera.

How To Reset Blink Camera?

In this section, I will explain how to reset Blink camera in brief. There are different types of Blink cameras XT2 is one of them. You’ll need the Sync module to operate these cameras.

You can follow these steps for how to reset Blink XT2 camera.

  1. First, locate the reset button on the side of the Sync Module.
  2. Now, press and hold the reset button until the LED blinks red.
  3. Release the button after a few seconds.
  4. Now, wait for the LED to blink green and blue.
  5. The Sync Module will go in set up mode.
  6. By using your Blink app, delete the Sync Module.

Thus, your Blink cameras will now be offline. You need to set them up once again to see your camera again. You can keep on reading to learn how to factory reset Blink mini camera.

Reset Blink Mini Camera

Many people do not know that the Blink mini camera doesn’t have to be connected to a Sync module to operate. You can follow these steps to learn how to reset a mini Blink camera.

  1. First, find the reset button on your mini Blink camera.
  2. Then, press and hold the reset button for at least 30 seconds.
  3. The camera will now go back to its factory defaults mode.

Thus, you can use the reset button when your camera is not connecting to the internet or has other issues.

Click here – How To Reset Xfinity Router?

Power Cycling Internet Modem

When your Blink cameras are offline, you can try power cycling your Internet modem. Follow these steps to learn how to power cycle your Internet modem.

  1. First, unplug your Internet modem and Wi-Fi router both.
  2. Then, wait for a few minutes.
  3. After that, plug the modem back in.
  4. Lastly, plug the router in.

Now, wait till the solid green and blue lights appear.

Reconnect Blink Camera To Wi-Fi

Once you reset your system, you have to re-install the Sync Module to the Blink app. This will help you to connect your camera to Wi-Fi once again.

You can follow these steps to learn how to reconnect the Blink camera to Wi-Fi.

  1. To start, open the Blink app on your device.
  2. Then, tap on the + sign.
  3. Here, select the Blink Wireless System.
  4. Now, either scan or enter the serial number of your Sync Module.
  5. Next, select your Blink system.
  6. Then, tap on the Discover Devices option.
  7. Lastly, tap on Join to finish.

Gather more information like this here.

You can read many interesting topis on


Is There A Reset Button On Blink Cameras?

The Blink Mini has a reset button on the bottom side of the camera, which may be necessary to use when you add it to a new or existing Blink system. In a case when you move the Mini to a new location or Wi-Fi network, you may also need to use the reset button.

How Do I Reset Blink Camera For New Owner?

Tap on Manage Account and you’ll see a Delete Account button. Tap on this and confirm that you would like to fully delete your account by pressing DELETE. When the new owner receives their equipment, they will be able to set up without running into any account issues.

Where Is The Reset Button On A Blink Module?

The reset button is located on the right-hand side of the Sync Module next to the USB port. Please note that this could take between 15-30 seconds. This will cause the Sync Module to reboot into setup mode.

What If My Blink Camera Is Already Registered To Another Account?

Devices already registered to your own account
If you see the message “Serial already registered to this account”, that means a device has already been added to your current account and cannot be re-added.

Click here – How To Reset Firestick?

Can A Stolen Blink Camera Be Used?

Can a stolen Blink camera be used? Since the camera is probably already tied to your account, it cannot be used unless you delete it from your account.

Why Is My Blink Camera Not Syncing?

If you receive an error “Unable to Connect to Sync Module” when adding cameras to a system (including the Blink Video Doorbell and Mini), the cause could be certain devices on your Wi-Fi network conflicting with the setup process such as: Smart Thermostats. Baby Monitors. Microwave Ovens, Refrigerators, etc.

Can You Delete A Blink Camera And Reinstall It?

After deletion
If you plan on adding the camera again to this system or another system, remove the batteries or unplug it for at least 15 seconds before attempting to add the camera. To reactivate a deleted camera, use the standard process of adding a camera to your Blink system.

What Happens If I Reset My Blink Camera?

Once you reset your system, you’ll have to reinstall the Sync Module to the Blink app to get it connected to Wi-Fi again. As detailed above, you can only reconfigure your system after resetting it and deleting it from the app.


By reading my above post, you’ve learned how to reset Blink camera system in detail. You can easily reset your Blink cameras if it has issues like it’s offline. Resetting cameras also allow you to resell them to a new owner. It helps to erase all your previous recordings from the system. Make sure first try power cycling your Internet modem and then your Sync Module. If this fails to work, then you can reset the Sync Model by pressing the reset button. Thus, you can now easily manage your Blink cameras by learning how to reset Blink camera.

How do I manually reset my Blink camera

How do I Reset my Blink camera?